Chip Tuning Tools
Chip Tuning Tools
This is a center of last generation ecu reading and programming tools, ECU programmer allows to read and program the whole ECU content of eprom file (or ROM memory with maps if eprom physically not present). The ECU remap flasher tools we supply include SMPS MPPS v.3.0.2.37 EDC16, xprog-m v5.0 programmer, KWP2000+, galletto 1260, BDM 100 Version 1253, kess obd tuning kit, and more.
These eprom programmers work with not only one or two specific car brands, but even more makes. Therefore, before ordering any ECU program tools from uobd2, please you tell us what type and which year of you car, more important is the car’s ECU type, then we will decide which ECU programmer fit your car.
BMW EWS Reader work with EWS alarm system equiped with EWS Immobilizers from 1995 year: E34(5xx), E36(3xx),E38 (7xx), E39 (5xx), E46 (3xx), E53 (X5), Z4, Mini Cooper, Rover 75, Range Rover.BMW EWS Reader supports reading and writing EWS3 and EWS3+ memory via unit connector (K-line).    Product Detail>>
Item No.: SE39
Start From: 1
This Tool is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU. The only difference between the two tools is that the MCU version works without a PC.    Product Detail>>
Item No.: SE41
Start From: 1
SKS-3058, diagnostic tool of testing analyzing equipment of automobiles EECS and ECU, is specially designed for engineers who repair automobiles EECS and ECU.    Product Detail>>
Item No.: SE40
Start From: 1
The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7. Read and write access to the EEprom. Reading the secret odometer (if stored in the engine control unit). Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU. With the write function is motor control "cloning" - no need to teach. Indispensable for workshops, recovery or Chiptuning.    Product Detail>>
Item No.: SE38
Start From: 1
SMPS MPPS v.3.0.2.37 Tuning Remap Chiptuning K+CAN Flasher Cable    Product Detail>>
Item No.: SE33-B
Start From: 1
SMPS MPPS v.3.0.2.37 Tuning Remap Chiptuning CAN Flasher is a USB chip tuning interface. This is good clone working with v. 3.0.2.37 version of software.This interface lets you to read and write memory of a car computer through the diagnostic connector    Product Detail>>
Item No.: SE32
Start From: 1
BDM 100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).    Product Detail>>
Item No.: SM01
Start From: 1
This Kit can be used to read and write flash dumps of the most recent ECU's .It is very easy to use - You need only a PC with Windows and a USB port.    Product Detail>>
Item No.: SE02
Start From: 1
UUSP UPA-USB UPAUSB UPA USB Serial Programmer Full Package V1.2    Product Detail>>
Item No.: SE37
Start From: 1
vag drive box bosch edc15/me7 obd2 immo deactivator corresponds to the Bosch control unis types EDC15 (Diesel) and ME7 (Patrol). The EDC15 control for diesel engines is installed in the models of brands VW, AUDI,SEAT and SKODA from 1999 onwards.    Product Detail>>
Item No.: SV34
Start From: 1
TMS374 Auto ECU Programmer    Product Detail>>
Item No.: SM06
Start From: 1
The MC68HC705B16 programmer supports programming of Motorola 68HC05Bxx, 68HC05Xxx microcontrollers internal EEPROM - most used programmable device in car radios, automotive computers (dashboards, AIRBAG, immobilizers).
    Product Detail>>
Item No.: SE12
Start From: 1
The MC68HC908AZ60 programmer supports Motorola MC68HC(9)08AZxx/ASxx, MC68HC05H12 microcontrollers internal EEPROM and FLASH reading, programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers).
    Product Detail>>
Item No.: SE13
Start From: 1
MC68HC11 Programmer communication with PC via a serial port ,it is easy to use Windows 98/ME/XP software In-circuit/On-board.    Product Detail>>
Item No.: SE14
Start From: 1
D80D0WQ ERASER/Programmer was used to Read, Program, Erase Incremental Registers\EEPROM. Compatible with Windwos 98/2000/XP    Product Detail>>
Item No.: SE23
Start From: 1
Audi VW micronas /Fujitsu programmer 2.0 >R200+R250
Audi VW micronas/Fujitsu programmer 2.0 replace the R200 and R250 fully
    Product Detail>>
Item No.: SE28
Start From: 1
Mercedes Benz W169 Can Filter    Product Detail>>
Item No.: SE29
Start From: 1
Mercedes Benz W170 Can Filter
    Product Detail>>
Item No.: SE30
Start From: 1
ECU flash reading/writing over diagnostic socket for a wide range of ECU units.    Product Detail>>
Item No.: SE03
Start From: 1
The memory for software and data is implemented as a programmable component into ECUs for a long time now.    Product Detail>>
Item No.: SPI 28
Start From: 1