The XPROG-m programmer is designed to replace the earlier version of XPROG programmer. XPROG-m programmer is fully upward-compatible hardware with XPROG programmer and have many additional features.    Product Detail>> Item No.: XPROG-M 5.0
Start From: 1

Fully support European, American and Asian vehicle types, most of which can be adjusted via OBD-II diagnostic plug.
BENZ A/C/CL/CLK/E/G/M/SL/SLK class (before 2000) New E/C class adopt CAN cable technology, cluster-socket operation (no need to adjust EIS/EZS)
Most of BMW 3/5/7/8/X/Z class vehicles, include operation on EWS, LCM can be adjusted via OBD-II diagnostic plug.    Product Detail>> Item No.: U2008
Start From: 1

UPA USB Serial Programmer with Full Adapters    Product Detail>> Item No.: UPA full set
Start From: 1

This interface can program also the new Audi A3/TT 2007 made after June 2006 featuring Micronas CDC3217and 2432 memory.    Product Detail>> Item No.: R250S
Start From: 1

1.Diagnose(KWP1281,KWP2000,KWP6000) 2.Odometer Correction(K-line,CAN BUS)3.Anti-theft code reader (IMMO1, IMMO2, IMMO3, WFS) 4.Key matching    Product Detail>> Item No.: DMW3
Start From: 1

Latest update: VW Polo , Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect.    Product Detail>> Item No.: VAG TACHO USB3.01
Start From: 1

The SUPER TACHO have everything inside what you need for bugfix and repair your dash and control device.The SUPER TACHO read the current mileage, decode and show the mileage in the LCD displayThe SUPER TACHO has a easy self explanitory operation by clear menu guidance    Product Detail>> Item No.: Super Tacho
Start From: 1

Modified program of Ford E250 08-UP, F150 06-UP, F350 06-UP, F500 05-UP, Town car 05-up , Taurus 08-UP , Chrysler PT Cruiser 99-01 .    Product Detail>> Item No.: USA Prog
Start From: 1

Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; Can make correction of odometer and read immo code.
Latest 07 update available now, it can do VW dash with CDC3217/97 and 24C32 memory BY OBD !!!!!! Not need to use the R250 anymore for the following VW dash, it can be done by Diag !!!!!    Product Detail>> Item No.: VAG DASH PROG
Start From: 1

You have to use UPS when you replace the battery jar of a car,which reduce unnecessary troubles caused by power turn-off.    Product Detail>> Item No.: Power Supply
Start From: 1

DATA SPECIALIST PLUS is a PC-based multi-function programmer for digital odometers, airbag modules, car radios, car immobilizers.    Product Detail>> Item No.: DATA SPECIALIST PLUS
Start From: 1

31728 supported devices by 2.38 version of SW (10. May. 2007) extremely fast programming, one of the fastest programmers in this category.    Product Detail>> Item No.: ELENC
Start From: 1

The item is mainly used for odometer adjusting, audio decoding, airbag resetting, anti-theft code reading, and ECU memory programming. Update through Internet; Nearly support all kinds of latest vehicles up to 2007.    Product Detail>> Item No.: DIGIMASTER II
Start From: 1

The TachoPro software might not work on PC`s that are faster than 233 MHZ.    Product Detail>> Item No.: Tachpro Kit
Start From: 1

YH6000 Data Processor for Auto Odometer and Audio    Product Detail>> Item No.: YH6000
Start From: 1

Applicable to most vehicles up to 2006. Automatically read out mileage and adjust directly at will, no need to calculate. Can be used as a programmer. Let you read, save, display, edit the memory .    Product Detail>> Item No.: Mileage master PC
Start From: 1

Latest update: VW Polo ,Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect.    Product Detail>> Item No.: VAG TACHO USB 2.5
Start From: 1